Date: Thursday, November 19, 2020
Time: 8:00 a.m. EST
Duration: Approximately 45 minutes
Presented By: Mats Jalk
Learn how to benefit from the possibilities of modularization. Ever shorter product cycles require modular machine and system concepts that can be flexibly modified.
Our product FieldPower provides the answer. With Weidmüllers modular system, classic control cabinet functions can be easily combined into functional units and arranged decentrally in the field.
- Introduction to the FieldPower system.
- Principle of FieldPower for AC and DC power distribution.
- Modular AC and DC power distribution.
- Smart factory grid 24VDC.
- Remote I/O using FieldPower.
- IoT solutions.
Date: Tuesday, December 1, 2020
Time: 10:00 a.m. EST
Duration: Approximately 45 minutes
Presented By: Knut Kemlein-Schiller
Increase availability of wind turbines, reduce downtimes and optimise efficiency One of the most important components of a wind turbine is the rotor blade. Day after day, these are exposed to enormous loads. Condition monitoring enables reliable online-based monitoring of the entire blade. This allows damage to be detected at an early stage. This gives you the time you need for fast intervention and saves you unnecessary costs and downtimes. Effective ice detection minimizes downtimes during ice events and minimized loads from your blade. This increases the energy yield and protects your turbine in the long term. For this purpose Weidmüller offers BLADEcontrol, a system that is explained in this webinar.
Date: Wednesday, December 2, 2020
Time: 10:00 a.m. EST
Duration: Approximately 45 minutes
Presented By: Steffen Niggemann
Reduce costs and increase your profit with Weidmüller's smart monitoring solutions Your wind turbines contain aging components such as gears, drive motors or batteries? Our customized systems provide you with information about the performance status of these components . Never again unplanned downtimes due to sudden failures Over the lifetime of a wind turbine, the installed components will wear out. However, aging does not occur evenly, so that in practice, sudden component failures occur again and again. With a targeted monitoring of the particularly endangered components, unplanned downtimes can be avoided. Weidmüller offers customer-specific monitoring solutions for this purpose, some of which are explained in this webinar.
Date: Thursday, December 3, 2020
Time: 8:00 a.m. EST
Duration: Approximately 45 minutes
Presented By: Mats Jalk
Learn how to benefit from the possibilities of modularization. Ever shorter product cycles require modular machine and system concepts that can be flexibly modified. Our product FieldPower provides the answer. With Weidmüllers modular system, classic control cabinet functions can be easily combined into functional units and arranged decentrally in the field. - Introduction to the FieldPower system. - Principle of FieldPower for AC and DC power distribution. - Modular AC and DC power distribution. - Smart factory grid 24VDC. - Remote I/O using FieldPower. - IoT solutions.
Date: Thursday, December 3, 2020
Time: 10:00 a.m. EST
Duration: Approximately 45 minutes
Presented By: Christian Hokamp
LED lighting solution Our durable LED lights constitute together with a comprehensive system for an uninterruptable power supply as well as optional remote monitoring and power outlets, a ready-to-fit solution for lighting, emergency lighting and power supply for wind turbine generators. All parts have been tried-and-tested and are perfectly coordinated to one another. Customer Specific Assemblies For your wind turbine we supply individually assembled enclosure solutions of the highest quality. These are assembled on the basis of many years of experience in the industry and equipped with suitable components from the Weidmüller portfolio. Our service range extends from the adaptation of existing solutions to the development of completely new products and concepts. This way you receive fully equipped enclosures that guarantee safe and trouble-free system operation and improve the performance of your system.
Date: Thursday, December 10, 2020
Time: 8:00 a.m. EST
Duration: Approximately 45 minutes
Presented By: Frank Polley
Do you want to know how to produce your control cabinet faster, more flexible and more economical? This is the goal of the Smart Cabinet Building initiative with its comprehensive automation range. The focus here is on identifying optimization potential and tapping into it with solutions available already today.
Presented By: Reinaldo Cozzo
Description: Protection of 24V power line: Fuse, Circuit breaker, Electronic load monitor and ELM with communication. Motivation of topGUARD. What information and functionalities are available through communication. Practical demonstration with IO-LINK
Presented By: Carl Hicks
Participants will learn what's available in terminal distribution technology: Screw and Push-in
Presented By: Jessica Williams
You will be presented with our Work Place Solution for Marking in the Food and Beverage Industry. After this webinar, you will gain a better understanding for the different detection methods to detect foreign bodies and how to select the right markers for the different areas in the facilities.
Highlights include:
Presented By: Alexander Quark & Carl Hicks
Participants will learn how to use shielding to improve system efficiency
Presented By: Jessica Williams
Participants will be shown the combination of Weidmuller tools and ferrules and connection technology.
Date: Thursday, July 16, 2020
Presented By: Maria Castillo
Learn about the new EDS file for u-remote EIP that allows you to export the data to Studio 5000.
Date: Monday, July 15, 2020
Presented By: Carl Hicks
Participants were presented with detailed instructions on how to establish their personal "Favorites" feature to search for commonly used items in WMC.
Learning objective: Demonstration on setting up "Favorites" function in Product Finder
Date: Monday, July 13, 2020
Presented By: Lars Brakemeier
You will be presented with the general overview of use of the software and machines and the key beginning functions of the Wire Processing Center Software Tool. You will be shown a virtual demo of this system.
Highlights include:
Date: Wednesday, July 8, 2020
Presented By: Jessica Williams
You will be presented with the general overview of main thoughts behind development of the Wire Processing Center and a high level view of the key features and benefits of this solution.
Highlights include:
Presented By: Jessica Williams
A introduction to Workplace Solution portfolio
Wednesday, May 20, 2020
Presented by Andrew Barco
2:00 PM EST
You will be presented with key beginning functions to initiate a user’s use of software.
You will obtain a basic skill set of:
Thursday, April 23, 2020
Presented by Andrew Barco
2:00 pm EST
Wednesday, April 22, 2020
Presented by Maria Castillo
2:30 PM EST
Friday, April 17, 2020
Presented by Maria Castillo
2:30 PM EST
Wednesday, April 15, 2020
Presented by Andrew Barco
2:00 pm EST
You will be presented with a general overview of the main thoughts behind the development of the software and a high level view of the key features that make this software a must have tool for your development requirements.
You will obtain a basic understanding of:
Presented by Andrea Briggs
Wednesday, March 25, 2020
9:00 AM EST
Thursday, March 26, 2020
2:00 PM EST