Pre charge units with many setting and diagnostic options

Switch on DC microgrids in segments, operate and monitor them safely

DC microgrids are becoming increasingly important in industry. They enable an efficient and stable power supply and the simple integration of renewable energies and storage systems - essential for more sustainability and climate neutrality. Pre charge units enable controlled, sequential ramp-up of industrial DC microgrids. This means that loads such as drives, motors, or complex load circuits can be started one after the other to avoid current peaks. Our pre charge units are available in several performance variants. Operating mode and switch-on delay can be set directly on the device. Further setting and diagnostic options can be selected via the optional communication interface.

Our product range in the field of pre charge units

Highlight

topPCU

Pre charge units enable controlled, sequential ramp-up of industrial DC microgrids. This means that loads such as drives, motors, or complex load circuits can be started one after the other to avoid current peaks. Our topPCU is available in several performance variants. Operating mode and switch-on delay can be set directly on the device. Further setting and diagnostic options can be selected via the optional communication interface.

Available in variants for DC sectors with 40, 100, or 500 A
Connections up to 16 mm² possible
Switch-on delay and operating mode (controller/device) adjustable
Communication interface for the configuration and diagnosis of unit and DC sector
Conforms to the DC Industry V3 system concept

Highlight

maxPCU

Pre charge units enable controlled, sequential ramp-up of industrial DC microgrids. This means that loads such as drives, motors, or complex load circuits can be started one after the other to avoid current peaks. Our maxPCU is available in a performance variant in operating mode as a controller. The switch-on delay can be set directly on the device.

Available in variants for DC sectors with 40 A
Connections up to 16 mm² possible
Switch-on delay adjustable
Conforms to the DC Industry V3 system concept

Pre charge units for DC microgrids

Direct current for the sustainable factory with DC infrastructure

Comprehensive solutions for your industry

Whether it's machine or plant construction or the large ship market – Weidmuller offers a wide range of components to find the right power supplies for every need and every requirement. Optimize your power management with our products and benefit from our know-how in the areas of innovation, performance and cost-effectiveness. We keep you competitive!

Ready for shipbuilding

For navigation systems on ships, the DC supply voltage must be maintained in the event of a power failure - with DC UPS systems from Weidmuller.

Machine or plant construction

We have the industry-specific high-performance solution for you – From buffer modules for systems in continuous operation or our maxGUARD load monitoring system for machine tools. Always customized power.

Regenerative energy generation

In wind turbines, for example, power supplies with an excellent power to cost ratio are used depending on the trade – PROmax power supplies.

Benefit from Weidmuller services and market experience

Simple planning through software support

Use the Weidmuller Configurator to quickly and easily configure and request our components. The tool supports continuous engineering workflows from planning with E-CAD systems to documentation.

Orange Selection

Products of the Orange Selection are available at any time. If your order is received by 3 p.m., your items will already be on their way the following day.