Fuse holders and fuse terminal blocks for the DIN rail

For some applications in the control cabinet or electrical switchgear, it is advantageous to protect the feed-through connection with a separate fuse. Fuse terminal blocks with a fuse holder for the DIN rail consist of a terminal block base and a fuse link carrier for various fuse links for AC and DC fuses.

The fuses vary from hinged fuse holders to plug-in fuse holders, screwable closures to flat plug-in fuses for cars and car mini fuses with and without LED status display. The fuse used limits the rated data (rated current and rated voltage) or the Low Leakage Current - LLC of the fuse terminal block.

New products for fuse terminal blocks

Klippon® Connect test-disconnect and fuse terminal blocks A2T 4 FS and A2T 4 DT

The number of sensors and actuators in the field is growing. More and more potentials have to be wired, fused, or even separated in the control cabinet. One example is servomotors with the potentials plus, minus, or PE. They require clear wiring, including fused potential.

The new two-tier terminals of the A2T 4 FS and A2T 4 DT series combine up to three functions per terminal. For example, you can choose from “Disconnect, feed-through, PE” or “Fuse, feed-through, PE.” Sensors and actuators can be wired conveniently and clearly on just one terminal block. The potentials can be fused or disconnected. Cross-connection channels on each level ensure safe potential distribution on the terminal strip.

Klippon® Connect W2C and W2T range signal wiring and signal marshaling

Automation in the process industry requires flexible solutions for complex production processes. Your circuit diagrams are complex as well, and may be changed up to the last minute. With our new range of DCS marshaling terminal blocks you can solve these challenges. Even a “last minute change” is feasible for you without having to change the wiring you have already done.

Thanks to the single and double-level arrangement of the terminal blocks, combined with the four basic available functions (continuity, disconnect, fuse, ground), you achieve maximum flexibility when connecting your devices wired in the field. We also offer an alternative to connecting the shield to PE for your potential-free shielding concepts.

Fuse holder with Blown Fuse Indication - BFI and minimum leakage current (LLC)

Fuse holder with Blown Fuse Indication - BFI and minimum leakage current (LLC)

Minimum leakage current in the event of a fault of less than 0.5 mA - Low Leakage Current

The LED circuits of the fuse terminal blocks (Blown Fuse Indication - BFI) are connected in parallel with the fuse, so that current only flows through the indicator when the fuse blows. In Weidmüller’s BFI circuits, the following current flows a minimum leakage current (Low Leakage Current - LLC) of less than 500 μA - not enough to pose a safety hazard or to erroneously activate the digital inputs of PLCs or DCSs.

The W-series terminals with screw connection, Z-Series terminals with tension clamp connection and A-Series terminals with PUSH IN connection have integrated fuse holders with BFI (Blown Fuse Indication) circuit and LLC (Low Leakage Current less than 0.5 mA) in case of a fault. The rated data of the fuse terminal and the exact leakage current or low leakage current are limited by the fuse or voltage variant of the fuse terminal block.

Download for our fuse terminals

On the website Engineering Data you will find an extensive selection of downloads related to CAT data. A wide range of digital product data is available for engineering systems such as EPLAN (EPLAN Electric P8 and EPLAN Pro Panel), Zuken E3.series, WSCAD, and many others to help you quickly integrate our products into your design. This data allows a precise representation of fuse terminal blocks such as a 2-wire fuse terminal or fuse terminals with hinged fuse holder for fine 5x20 fuses and show all relevant electrotechnical and operational characteristics.

Klippon® Connect AFS 4 and ADT 4 terminal blocks

Our tailored fuse, disconnect and feed-through terminal blocks are the ideal solution for central control voltage distribution and surge current protection.

Product range

Our product range of fuse terminals with fuse holder

PUSH IN technology

Thanks to the extensive range of accessories and the various cross-connection options, you can solve any requirement with our black fuse terminal blocks with fuse holder for fine-wire fuses and PUSH IN connection technology.

Tension clamp connection

Fuse terminal blocks with proven tension clamp technology are suitable for particularly compact but nevertheless clearly arranged control cabinet assembly. Its incredibly high degree of flexibility makes the tension clamp an excellent connection alternative for the electrical connection of flexible and solid wires.

Screw connection

The high reliability and wide range of variants of fuse terminal blocks for DIN rail with clamping yoke connection provide relief in planning and maximum safety in operation with and without wire end ferrules.

Consulting & Support